Advanced Blend

Advanced BlendFor maximum power, you can start the BlendJet upside down and allow the blades to get up to their full RPMs before blending.

Advanced Jam

Advanced JamIf the BlendJet is jammed and the Regular Jam solution doesn't fix it, flip it upside down and twist off the base to remove whatever has blocked the blades. Then, twist the base back on, align the base correctly, and start blending.

Blending Ice

Blending IceStart with plenty of liquid, add ice, and blend!

Cutting Fruit

Cutting FruitCutting your fruit or other smoothie ingredients into small chunks will allow for the smoothest possible blend.

Deep Cleaning

Deep CleaningDeep clean the BlendJet periodically. The lid and strainer can be separated, and the jar can be removed from the base. There are silicone o-rings in the lid, jar, and base. The o-rings should be removed for a more thorough clean and left out long enough for each part to fully air dry. Be careful to avoid getting water in the charging port.


DryingRemove and separate the lid and strainer to let the BlendJet air dry after cleaning.

Avoid Running While Empty

Avoid Running While EmptyDo not run the BlendJet when the jar is empty to avoid burning out the motor.

First Use

First UseBlendJet comes partially charged at purchase, so you can give the blender a quick clean before plugging in for a full charge.

Hot Liquids

Hot LiquidsWe do not recommend putting hot liquids that are over 120° F / 49°C into the BlendJet, as this may cause damage, including leaks, to the jar and base.

Jar Magnet Alignment

Jar Magnet AlignmentAs a safety precaution, there are magnets in the jar and base of the BlendJet, which must be aligned, or the blades won't spin. Make sure the arrow on the front of the jar is aligned with the arrow on the front of the base.

Keep Hands Out

Keep Hands OutNever put your hands inside the BlendJet or touch the blades with your fingers.

Don't Overload

Don't OverloadNever overload your BlendJet with ingredients. Leave a little room at the top.

Solid Red Light

Solid Red LightThe light turns red when the BlendJet needs to be charged. Charge the blender with any USB port, and the light will turn blue once it is fully charged.

Safety Feature

Safety FeatureThe built-in safety feature prevents the blades from spinning when the jar is detached.

Easy to Clean

Easy to CleanCleaning is easy. Just add a drop of soap, water, blend, and rinse.

Basic Blend

Basic BlendAfter you've added your liquid, toss in the rest of your smoothie ingredients (or ingredients for whatever you are making) and blend!

Start with Liquid

Start with LiquidAlways start by adding a liquid (like water, milk, or juice). This will make blending easy.


StrainerBlendJet features a built-in strainer to help keep your beverages, and other concoctions, chunk-free.

Red & Blue Flashing Lights

Red & Blue Flashing LightsRed and blue flashing lights mean the jar is not aligned with the base. To fix this, screw the jar clockwise into the base until the arrow on the jar lines up with the arrow on the base. As a safety precaution, there are magnets on the jar, which must be aligned, or the blades won't spin.

Regular Jam

Regular JamIf the blades are jammed, simply flip the blender upside down, give it a quick shake and turn it on. Then, turn it right-side up so that your ingredients hit all 6 blades at full speed.